I can't get my wireless card to be used/assigned under backtrack4. I know it works I've used it on other backtrack installs.
Everything seems to point to backtrack recognizing/seeing it, but it's not recognizing the eth1/wlan0/ath0 interface when I try to set it up.
ThoughtS?
root@bt:/usr/local/src/compat-wireless-2.6.38-rc4-1# lshw -C network
 *-network:0
      description: Ethernet interface
      product: 82540EP Gigabit Ethernet Controller (Mobile)
      vendor: Intel Corporation
      physical id: 1
      bus info: pci@0000:02:01.0
      logical name: eth0
      version: 03
      serial: 00:0d:60:b0:c0:ba
      size: 100MB/s
      capacity: 1GB/s
      width: 32 bits
      clock: 66MHz
      capabilities: pm msi bus_master cap_list ethernet physical tp
10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
      configuration: autonegotiation=on broadcast=yes driver=e1000
driverversion=7.3.21-k6-NAPI duplex=full firmware=N/A ip=10.0.2.4
latency=64 link=yes mingnt=255 module=e1000 multicast=yes port=twisted
pair speed=100MB/s
 *-network:1 UNCLAIMED
      description: Network controller
      product: PRO/Wireless LAN 2100 3B Mini PCI Adapter
      vendor: Intel Corporation
      physical id: 2
      bus info: pci@0000:02:02.0
      version: 04
      width: 32 bits
      clock: 33MHz
      capabilities: pm cap_list
      configuration: latency=64 maxlatency=34 mingnt=2
root@bt:/usr/local/src/compat-wireless-2.6.38-rc4-1# lspci
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O
Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP
Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250
[Mobility FireGL 9000] (rev 02)
02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus
Controller (rev 01)
02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit
Ethernet Controller (Mobile) (rev 03)
02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter (rev 04)
root@bt:/usr/local/src/compat-wireless-2.6.38-rc4-1# iwconfig
lo        no wireless extensions.
eth0      no wireless extensions.
irda0     no wireless extensions.
root@bt:/usr/local/src/compat-wireless-2.6.38-rc4-1# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0d:60:b0:c0:ba
         inet addr:10.0.2.4  Bcast:10.0.3.255  Mask:255.255.252.0
         inet6 addr: fe80::20d:60ff:feb0:c0ba/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:5388 errors:0 dropped:0 overruns:0 frame:0
         TX packets:4639 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:5188403 (5.1 MB)  TX bytes:983799 (983.7 KB)
irda0     Link encap:IrLAP  HWaddr 00:00:00:00
         NOARP  MTU:2048  Metric:1
         RX packets:0 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:8
         RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
lo        Link encap:Local Loopback
         inet addr:127.0.0.1  Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:58 errors:0 dropped:0 overruns:0 frame:0
         TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:2900 (2.9 KB)  TX bytes:2900 (2.9 KB)
UPDATE:
Found the following code in dmesg. It appears that the firmware module isn't being loaded.
root@bt:~# dmesg 2>&1 | grep ipw
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@<a href="http://linux.intel.com">linux.intel.com>
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
ipw2100 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
ipw2100: eth1: Firmware 'ipw2100-1.3.fw' not available or load failed.
ipw2100: eth1: ipw2100_get_firmware failed: -2
ipw2100: eth1: Failed to power on the adapter.
ipw2100: eth1: Failed to start the firmware.
ipw2100Error calling register_netdev.
ipw2100 0000:02:02.0: PCI INT A disabled
ipw2100: probe of 0000:02:02.0 failed with error -5
                             
                                                        
                                
                                
                            
                            
                                    
    
        asked
        19 Apr '11, 02:10
    
     
    rfelsburg ♦
    606●1●6●18
    
    accept rate:
    25%